The FREE size 6-12 month pattern will be available exclusively to my email newsletter subscribers – if you haven’t subscribed, look in the right column right under my menu bar and subscribe. It’s easy and I give you free things.
Today I’m going to show you how I made the bloomers that my niece wore with this dress.
I didn’t take pictures while making the original bloomers, so you’ll see a different pair in the tutorial. That also allowed me to use colors that will hopefully be easier for you to see. There’s a free pattern for you to download too.
So, you’ll need
- 1/2 yd of fabric for the bloomers
- 2 strips of fabric 28 inches long by 3 1/2 inches wide for the ruffles
- 1/2 inch wide elastic for waist, about 17 inches
- 1/4 inch wide elastic for the legs, about 20 inches
- The bloomer pattern
Next, take one of your ruffle strips and sew it into a tube, right sided together (full disclosure – on the original bloomers, I did a rolled hem on the edges of the ruffle with my serger. If you have a serger and want to do that, it works great. But I’m writing this with the assumption that many don’t have sergers)
Next, use a safety pin fed through your tube to turn it right side out.
Press your tube so that the seam runs down the center of one side
Push the raw edges into the tube about 1/4 inch and sew across ends.
Sew down the middle of your tube with the longest stitch your machine will do. By pulling one thread (either the top or the bottom, it doesn’t matter) you create the ruffle. Ruffle until it is the same length as your ruffle placement line, then pin the ruffle onto the line with the seam down (please ignore my mistake chalk mark on the bottom of this picture). Sew in place.
Now fold the bloomers with right sides together and sew down the side edges, using a 1/2 inch seam
Check your edges around the seams at the leghole. If they didn’t match perfectly, trim.
Finish your seams. I prefer to do this by trimming with pinking shears (when I’m not using my serger)
At the waistline, turn under about 1/8″ then turn under again 5/8″. At the leg holes, turn under about 1/8″ and then 3/8″. Give or take an 8th. I always just hold up the elastic and make sure I have room to sew the edge and room to pull the elastic through. Pin your casing.
Sew the casings, being sure to leave an opening to thread elastic through.
It’s best to measure your baby and then cut the elastic to their waist measurement, but if you’re making this for a gift, 17 inches is about right for a 3-6 month old waist and 10 inches is about right for a leg. Thread your elastic through the casing using a safety pin. Don’t worry that I’m using black elastic – I ran out of white and it’s the same stuff.
Overlap the ends of the elastic about 1/2″ without twisting, and sew them together, backstitching a couple times. Then pull into the casing and sew the casing shut. While sewing the casing shut, you’ll want to gently pull on the elastic to flatten the casing where you’re sewing.
Ta-da! Here’s the front of the bloomers (see, I told you the wrinkles wouldn’t matter).
And here’s the back.
Now find a cute baby booty to put them on!Get access to my free pattern gallery - sign up for my newsletter!