Wrapping up our sundresses for us today is Shannon. I about peed my pants when I saw an e-mail from her in my inbox, because this woman is a bona-fide blog celebrity in my book. The photography on her blog is so beautiful, she’s hilarious, and basically her blog is what I want mine to be like when it grows up.
Hi Melly Sews readers! I’m Shannon from the blog “luvinthemommyhood” and I’m so happy to be here today to celebrate all the fun thing about sewing dresses – especially sundresses! I love me a good dress! In fact instead of sharing a brand new tutorial I decided to share one of my faves that is great for any level sewer and any season. It’s also a lot of fun to customize. So grab your current fabric crush, your sewing machine & come sew with me! Here’s the Delaney Dress Tutorial (& Pattern)!
Last fall I fell head first into the wonderful tones of orange, purple, pink and green and who better to feed my fabric cravings for those yummy colors than Amy Butler! I used Disco Flower in tangerine from my sponsor stitchsimple.com for the Delaney Dress.
I couldn’t resist making a dress with the same retro flair as my Autumn Tunic Tutorial. I wanted something simple, classic yet modern and fun. I’m totally crushing on the full skirt, double stitched bias tape trim and belt and the sleeves….love the sleeves. Harper just melts my heart in this little frock. It sure is fun to look back and see how much she has grown and how long all those curly ringlets are now!
And guess what? You can make one too! I kept it nice and easy for you all. The Delaney Dress is a great base for you to start with if you are just learning to sew and one for more advanced sewers to add their own personal flair. There’s no zippers, buttons or tricky detail work. It’s simple, fast to make and oh so fun to see your wee one wear!
I mean how cute is this? So sweet!
I can just feel the summer sunshine pouring from this dress! Even though I made this in the fall it’s a great little frock to whip up for the summer as well! You ready to get sewing with me?
: MATERIALS :
– 1 yard fabric (I used quilting cotton) pre-washed and dried. Trust me. You want to do this 🙂
– Co-ordinating thread
– 1 package co-ordinating double fold bias tape or handmade bias tape in the distance to suit the size of your dress.
– Sewing machine
– Pinking shears (*optional)
– Fabric marker (fade/washable)
: PATTERN PIECES :
You can print out the following pattern pieces by simply clicking on the link below. *Note: Make sure when printing your pattern pieces your printer is set to “actual size” or set your page scaling to “none”. Be sure not to select “shrink to fit” or any other page scaling as this will result in your pattern pieces being the incorrect size.
: INSTRUCTIONS :
*All seams have a 1/2″ seam allowance unless otherwise stated.
1. Print out the pattern pieces above on standard size paper (8 1/2″ x 11″). *Note: Make sure when printing your pattern pieces your printer is set to “actual size” or set your page scaling to “none”. Be sure not to select “shrink to fit” or any other page scaling as this will result in your pattern pieces being the incorrect size. Cut them out. Place on your fabric taking care that if you have a print that they are all going in the correct direction and that you are cutting with your fabric give going from left to right (you can check this by pulling the fabric to see which direction gives the most ease or stretch) and cut. Set aside.
2. Cut out two pieces of fabric 12″L by 25″W for the skirt. Place skirt pieces right sides facing together and pin sides. Sew together your side seams with a 1/2″ seam allowance. Press. Finish seam with a zig zag stitch or clip with pinking shears.
3. It’s time to ruffle that pretty skirt up! There are many ways to ruffle a skirt and because I am still learning the best one on my machine I still do it the more involved way. Simply stitch along the entire top of the skirt using a basting stitch with a 1/4″ seam allowance taking care not to backstitch at all. when done simply pull the bottom thread (bobbin thread) of your seam to ruffle the fabric. don’t pull too hard though – you don’t want to break it & don’t ruffle it too much, we need to fit it to the bodice later.
4. Grab your bodice pieces. Place fabrics right sides facing together and pin. Sew together your sides seams with a 1/2″ seam allowance. Press. Finish seam with a zig zag stitch or clip with pinking shears.
5. Pin straps of bodice together with right sides still facing each other. This is a good time to try the dress on your little one to make sure the sizing is going to work with your toddler. If any adjustments need to be made to the bodice width now is the time to do it. If all is good your next step is to sew both straps with a 1/2″ seam allowance or size to fit your child’s body. Press. Finish seam with a zig zag stitch or clip with pinking shears.
6. Fold your bodice in half marking the center point of the bodice back with a fabric pen or pin. Measure down 3 inches and make another mark. Cut a straight line from one mark to another. This will later form your “v” neck back opening.
7. Grab your cute sleeves. Take the outer edge and fold in 1/4″ and press, then fold 1/4″ again and press pinning the last fold down as you go. Now you’re ready to stitch that lovely hem down. Sew your sleeve edging close to the inner edge of your fold. Press.
8. Fold sleeve pieces in half making a finger press fold and mark where your center is with a fabric pen or pin. With bodice wrong side out (wrong side showing, right side inside) and sleeve right side out (right side facing and wrong side inside) place sleeve inside the opening for the sleeve matching center point of sleeve to center top of sleeve opening. Bottom points of sleeve should be overlapping for a clean finish. Sew with a 1/2″ seam allowance. Press and finish seam with a zig zag stitch or clip with pinking shears. Do this for both sleeves.
9. Time to put that skirt with the bodice! Take your ruffled skirt – wrong side out, and your bodice – right side out and place bodice inside the skirt matching the bottom of bodice to top of skirt. Pin down making sure the ruffling of your skirt matches up evenly around the bodice. You don’t want some areas more ruffly than others. Sew the skirt to the bodice with a 1/2″ seam allowance. Press and finish seam with a zig zag stitch or clip with pinking shears.
10. Hem your dress to your preferred length. I folded mine 1/4″, pressed, then folded 1/2″ and pressed. I stitched down close to the inner side of the folded edge then pressed again. I then topstitched close to my hem line for a double stitch finish to match the bias tape finish you will be doing soon. Add a label if you are using one and voila!
11. Next we are going to finish off the neck. We’re almost done! Taking your bias tape, starting at the top of one shoulder, pin down along the entire neck and back opening taking care to fold properly at tops of back opening and bottom of “v” opening in back. (It would take me a whole post to explain the sewing of bias tape so I’ll just direct you over to Dana from Made’s handy post here for making your own and here for sewing it). Next sew down your bias tape close to the edge taking care to catch the underside of your bias tape. When stitching the “V” opening I sort of folded the bias in on itself to form a v point at the bottom and stitched it down (see picture above). Press. Stitch along the entire neckline again but this time close to the opposite edge. Purdy!
12. It’s time to add the tie! Cut bias tape the length you would like making sure to be able to tie a bow in the back. Mine was 64″ long. Fold bias tape in half and mark center point. Pin center of bias tape to corresponding center of dress. Pin bias tape down with the joining seam of the bodice/skirt in the center of your bias tape. Pin from left side seam straight over to right side seam. Stitch close to left edge from this side to the other. Backstitch. Start again on the bottom right seam and sew over to the bottom of the left seam. Backstitch again. Another pretty finish! Now the next step is up to you. You could continue the same two stitch lines along the entire bias tape ends that will be tied in a bow but I got lazy and didn’t cause I actually prefer to not sew bias tape. We have a love/hate relationship so I left mine unfinished….for now 🙂
13. Press your dress and stand back and admire your hard work! Great job!!! Now go take a fab photo of your new frock and post it in our flickr group so we can admire your sewing skills! And don’t forget to leave me a comment on my original tutorial too so I can see how it turned out! Also, feel free to email if you have any questions or problems – [email protected]
Thanks so much for having me Melissa! Happy summer sewing everyone! You can find all things luvinthemommyhood here: